STS-02: conditions for the UAS operation
Verified from official sourcesIn plain language
UAS operations in STS-02 shall be conducted: (1) in accordance with the operations manual referred to in point (1) of point UAS.STS-02.030; (2) over a controlled ground area entirely located in a sparsely populated environment including: (a) the flight geography area, (b) the contingency, which its external limit(s) shall be located at least 10 m beyond the limit(s) of the flight geography area, (c) a ground risk buffer covering a distance that is at least equal to the distance most likely to be travelled by the UA after activation of the means to terminate the flight specified by the UAS manufacturer in manufacturer's instructions, considering the operational conditions within the limitations specified by the UAS manufacturer; (3) in an area where the minimum flight visibility is more than 5 km; (4) with the unmanned aircraft in sight of the remote pilot during the launch and recovery of the unmanned aircraft, unless the latter is the result of an emergency flight termination; (5) if no airspace observer is used in the operation, with the unmanned aircraft flying no further than 1 km from the remote pilot, with the unmanned aircraft following a pre-programmed trajectory when the unmanned aircraft is not in VLOS of the remote pilot; (6) if one or more airspace observers are used in the operation, it shall comply with all of the following conditions: (a) the airspace observer(s) are positioned in a manner allowing for an adequate coverage of the operational volume and the surrounding airspace with the minimum flight visibility indicated in point (3); (b) the unmanned aircraft is operated no further than 2 km from the remote pilot; (c) the unmanned aircraft is operated no further than 1 km from the airspace observer who is nearest to the unmanned aircraft; (d) the distance between any airspace observer and the remote pilot is not more than 1 km; (e) robust and effective communication means are available for the communication between the remote pilot and the airspace observer(s); (7) by a remote pilot who holds: (a) a certificate of remote pilot theoretical knowledge for operations in standard scenarios, issued by the competent authority or by an entity designated by the competent authority of a Member State; (b) an accreditation of completion of the STS-02 practical skill training, in accordance with Attachment A to this Chapter and issued by: (A) an entity that has declared compliance with the requirements in Appendix 3 and is recognised by the competent authority of a Member State; or (B) by an UAS operator that has declared to the competent authority of the Member State of registration, compliance with STS-02 and that has declared compliance with the requirements in Appendix 3; (8) with an unmanned aircraft which complies with all of the following conditions: (a) is marked as class C6 and complies with the requirements of that class, as defined in Part 17 of the Annex to Delegated Regulation (EU) 2019/945; (b) is operated with an active system to prevent the unmanned aircraft from breaching the flight geography; (c) is operated with active and updated direct remote identification system. (9) The remote pilot shall obtain the certificate of theoretical knowledge for operations in the standard scenarios after: (a) having completed an online training course and passed the online theoretical knowledge examination as referred to in point (4)(b) of point UAS.OPEN.020; and (b) having passed an additional theoretical knowledge examination provided by the competent authority or by an entity designated by the competent authority of a Member State in accordance with Attachment A to this Chapter. (10) This certificate shall be valid for five years. The revalidation, within its validity period is subject to any of the following: (a) the demonstration of competencies in accordance with point (9); (b) the completion of a refresher training addressing the theoretical knowledge subjects as defined in point (9) provided by the competent author
Requirement as structured
UAS operations in STS-02 shall be conducted: (1) in accordance with the operations manual referred to in point (1) of point UAS.STS-02.030; (2) over a controlled ground area entirely located in a sparsely populated environment including: (a) the flight geography area, (b) the contingency, which its external limit(s) shall be located at least 10 m beyond the limit(s) of the flight geography area, (c) a ground risk buffer covering a distance that is at least equal to the distance most likely to be travelled by the UA after activation of the means to terminate the flight specified by the UAS manufacturer in manufacturer's instructions, considering the operational conditions within the limitations specified by the UAS manufacturer; (3) in an area where the minimum flight visibility is more than 5 km; (4) with the unmanned aircraft in sight of the remote pilot during the launch and recovery of the unmanned aircraft, unless the latter is the result of an emergency flight termination; (5) if no airspace observer is used in the operation, with the unmanned aircraft flying no further than 1 km from the remote pilot, with the unmanned aircraft following a pre-programmed trajectory when the unmanned aircraft is not in VLOS of the remote pilot; (6) if one or more airspace observers are used in the operation, it shall comply with all of the following conditions: (a) the airspace observer(s) are positioned in a manner allowing for an adequate coverage of the operational volume and the surrounding airspace with the minimum flight visibility indicated in point (3); (b) the unmanned aircraft is operated no further than 2 km from the remote pilot; (c) the unmanned aircraft is operated no further than 1 km from the airspace observer who is nearest to the unmanned aircraft; (d) the distance between any airspace observer and the remote pilot is not more than 1 km; (e) robust and effective communication means are available for the communication between the remote pilot and the airspace observer(s); (7) by a remote pilot who holds: (a) a certificate of remote pilot theoretical knowledge for operations in standard scenarios, issued by the competent authority or by an entity designated by the competent authority of a Member State; (b) an accreditation of completion of the STS-02 practical skill training, in accordance with Attachment A to this Chapter and issued by: (A) an entity that has declared compliance with the requirements in Appendix 3 and is recognised by the competent authority of a Member State; or (B) by an UAS operator that has declared to the competent authority of the Member State of registration, compliance with STS-02 and that has declared compliance with the requirements in Appendix 3; (8) with an unmanned aircraft which complies with all of the following conditions: (a) is marked as class C6 and complies with the requirements of that class, as defined in Part 17 of the Annex to Delegated Regulation (EU) 2019/945; (b) is operated with an active system to prevent the unmanned aircraft from breaching the flight geography; (c) is operated with active and updated direct remote identification system. (9) The remote pilot shall obtain the certificate of theoretical knowledge for operations in the standard scenarios after: (a) having completed an online training course and passed the online theoretical knowledge examination as referred to in point (4)(b) of point UAS.OPEN.020; and (b) having passed an additional theoretical knowledge examination provided by the competent authority or by an entity designated by the competent authority of a Member State in accordance with Attachment A to this Chapter. (10) This certificate shall be valid for five years. The revalidation, within its validity period is subject to any of the following: (a) the demonstration of competencies in accordance with point (9); (b) the completion of a refresher training addressing the theoretical knowledge subjects as defined in point (9) provided by the competent author
Original regulatory text
UAS operations in STS-02 shall be conducted: (1) in accordance with the operations manual referred to in point (1) of point UAS.STS-02.030; (2) over a controlled ground area entirely located in a sparsely populated environment including: (a) the flight geography area, (b) the contingency, which its external limit(s) shall be located at least 10 m beyond the limit(s) of the flight geography area, (c) a ground risk buffer covering a distance that is at least equal to the distance most likely to be travelled by the UA after activation of the means to terminate the flight specified by the UAS manufacturer in manufacturer's instructions, considering the operational conditions within the limitations specified by the UAS manufacturer; (3) in an area where the minimum flight visibility is more than 5 km; (4) with the unmanned aircraft in sight of the remote pilot during the launch and recovery of the unmanned aircraft, unless the latter is the result of an emergency flight termination; (5) if no airspace observer is used in the operation, with the unmanned aircraft flying no further than 1 km from the remote pilot, with the unmanned aircraft following a pre-programmed trajectory when the unmanned aircraft is not in VLOS of the remote pilot; (6) if one or more airspace observers are used in the operation, it shall comply with all of the following conditions: (a) the airspace observer(s) are positioned in a manner allowing for an adequate coverage of the operational volume and the surrounding airspace with the minimum flight visibility indicated in point (3); (b) the unmanned aircraft is operated no further than 2 km from the remote pilot; (c) the unmanned aircraft is operated no further than 1 km from the airspace observer who is nearest to the unmanned aircraft; (d) the distance between any airspace observer and the remote pilot is not more than 1 km; (e) robust and effective communication means are available for the communication between the remote pilot and the airspace observer(s); (7) by a remote pilot who holds: (a) a certificate of remote pilot theoretical knowledge for operations in standard scenarios, issued by the competent authority or by an entity designated by the competent authority of a Member State; (b) an accreditation of completion of the STS-02 practical skill training, in accordance with Attachment A to this Chapter and issued by: (A) an entity that has declared compliance with the requirements in Appendix 3 and is recognised by the competent authority of a Member State; or (B) by an UAS operator that has declared to the competent authority of the Member State of registration, compliance with STS-02 and that has declared compliance with the requirements in Appendix 3; (8) with an unmanned aircraft which complies with all of the following conditions: (a) is marked as class C6 and complies with the requirements of that class, as defined in Part 17 of the Annex to Delegated Regulation (EU) 2019/945; (b) is operated with an active system to prevent the unmanned aircraft from breaching the flight geography; (c) is operated with active and updated direct remote identification system. (9) The remote pilot shall obtain the certificate of theoretical knowledge for operations in the standard scenarios after: (a) having completed an online training course and passed the online theoretical knowledge examination as referred to in point (4)(b) of point UAS.OPEN.020; and (b) having passed an additional theoretical knowledge examination provided by the competent authority or by an entity designated by the competent authority of a Member State in accordance with Attachment A to this Chapter. (10) This certificate shall be valid for five years. The revalidation, within its validity period is subject to any of the following: (a) the demonstration of competencies in accordance with point (9); (b) the completion of a refresher training addressing the theoretical knowledge subjects as defined in point (9) provided by the competent authority or by an entity designated by the competent authority; (11) In order to revalidate the certificate upon its expiration, the remote pilot shall comply with point (9). <