STS-02: responsibilities of the UAS operator

In plain language

In addition to the responsibilities defined in UAS.SPEC.050, the UAS operator shall: (1) develop an operations manual including the elements defined in Appendix 5; (2) define the operational volume and ground risk buffer for the intended operations, including the controlled ground area covering the projections on the surface of the earth of both the volume and the buffer; (3) ensure the adequacy of the contingency and emergency procedures through any of the following: (a) dedicated flight tests; (b) simulations, provided that the representativeness of the simulation means is appropriate for the intended purpose; (4) develop an effective emergency response plan (ERP) suitable for the operation that includes at least: (a) the plan to limit the escalating effects of the emergency situation; (b) the conditions to alert the relevant authorities and organisations; (c) the criteria to identify an emergency situation; (d) clear delineation of the duties of the remote pilot(s) and any other personnel in charge of duties essential to the UAS operation; (5) ensure that the level of performance for any externally provided service necessary for the safety of the flight is adequate for the intended operation; (6) define the allocation of the roles and responsibilities between the operator and the external service provider(s), if applicable; (7) upload updated information into the geo-awareness, if the function is installed on the UAS, when required by the UAS geographical zone for the intended location of the operation; (8) ensure that, before starting the operation, all appropriate measures to reduce the risk of intrusion of uninvolved persons in the controlled ground area compliant with the minimum distance defined in point UAS.STS-02.020(2) have been taken and, when required, coordination with the appropriate authorities has been conducted; (9) ensure that, before starting the operation, all persons present in the controlled ground area: (a) have been informed of the risks of the operation; (b) have been briefed and, if applicable, trained on the safety precautions and measures established by the UAS operator for their protection; and (c) have explicitly agreed to participate in the operation; (10) before starting the operation, if airspace observers are used: (a) ensure the correct placement and number of airspace observers along the intended flight path; (b) verify: (i) that the visibility and the planned distance of the airspace observer are within acceptable limits as defined in the operations manual; (ii) the absence of potential terrain obstructions for each airspace observer; (iii) that there are no gaps between the zones covered by each of the airspace observers; (iv) that the communication with each airspace observer is established and effective; (v) that if means are used by the airspace observers to determine the position of the unmanned aircraft, those means are functioning and effective; (c) ensure that the airspace observers have been briefed on the intended path of the unmanned aircraft and the associated timing; (11) ensure that: (a) the UAS is accompanied by the corresponding EU declaration of conformity, including the reference to class C6; (b) the class C6 identification label is affixed to the unmanned aircraft. <

Requirement as structured

In addition to the responsibilities defined in UAS.SPEC.050, the UAS operator shall: (1) develop an operations manual including the elements defined in Appendix 5; (2) define the operational volume and ground risk buffer for the intended operations, including the controlled ground area covering the projections on the surface of the earth of both the volume and the buffer; (3) ensure the adequacy of the contingency and emergency procedures through any of the following: (a) dedicated flight tests; (b) simulations, provided that the representativeness of the simulation means is appropriate for the intended purpose; (4) develop an effective emergency response plan (ERP) suitable for the operation that includes at least: (a) the plan to limit the escalating effects of the emergency situation; (b) the conditions to alert the relevant authorities and organisations; (c) the criteria to identify an emergency situation; (d) clear delineation of the duties of the remote pilot(s) and any other personnel in charge of duties essential to the UAS operation; (5) ensure that the level of performance for any externally provided service necessary for the safety of the flight is adequate for the intended operation; (6) define the allocation of the roles and responsibilities between the operator and the external service provider(s), if applicable; (7) upload updated information into the geo-awareness, if the function is installed on the UAS, when required by the UAS geographical zone for the intended location of the operation; (8) ensure that, before starting the operation, all appropriate measures to reduce the risk of intrusion of uninvolved persons in the controlled ground area compliant with the minimum distance defined in point UAS.STS-02.020(2) have been taken and, when required, coordination with the appropriate authorities has been conducted; (9) ensure that, before starting the operation, all persons present in the controlled ground area: (a) have been informed of the risks of the operation; (b) have been briefed and, if applicable, trained on the safety precautions and measures established by the UAS operator for their protection; and (c) have explicitly agreed to participate in the operation; (10) before starting the operation, if airspace observers are used: (a) ensure the correct placement and number of airspace observers along the intended flight path; (b) verify: (i) that the visibility and the planned distance of the airspace observer are within acceptable limits as defined in the operations manual; (ii) the absence of potential terrain obstructions for each airspace observer; (iii) that there are no gaps between the zones covered by each of the airspace observers; (iv) that the communication with each airspace observer is established and effective; (v) that if means are used by the airspace observers to determine the position of the unmanned aircraft, those means are functioning and effective; (c) ensure that the airspace observers have been briefed on the intended path of the unmanned aircraft and the associated timing; (11) ensure that: (a) the UAS is accompanied by the corresponding EU declaration of conformity, including the reference to class C6; (b) the class C6 identification label is affixed to the unmanned aircraft. <

Original regulatory text

In addition to the responsibilities defined in UAS.SPEC.050, the UAS operator shall: (1) develop an operations manual including the elements defined in Appendix 5; (2) define the operational volume and ground risk buffer for the intended operations, including the controlled ground area covering the projections on the surface of the earth of both the volume and the buffer; (3) ensure the adequacy of the contingency and emergency procedures through any of the following: (a) dedicated flight tests; (b) simulations, provided that the representativeness of the simulation means is appropriate for the intended purpose; (4) develop an effective emergency response plan (ERP) suitable for the operation that includes at least: (a) the plan to limit the escalating effects of the emergency situation; (b) the conditions to alert the relevant authorities and organisations; (c) the criteria to identify an emergency situation; (d) clear delineation of the duties of the remote pilot(s) and any other personnel in charge of duties essential to the UAS operation; (5) ensure that the level of performance for any externally provided service necessary for the safety of the flight is adequate for the intended operation; (6) define the allocation of the roles and responsibilities between the operator and the external service provider(s), if applicable; (7) upload updated information into the geo-awareness, if the function is installed on the UAS, when required by the UAS geographical zone for the intended location of the operation; (8) ensure that, before starting the operation, all appropriate measures to reduce the risk of intrusion of uninvolved persons in the controlled ground area compliant with the minimum distance defined in point UAS.STS-02.020(2) have been taken and, when required, coordination with the appropriate authorities has been conducted; (9) ensure that, before starting the operation, all persons present in the controlled ground area: (a) have been informed of the risks of the operation; (b) have been briefed and, if applicable, trained on the safety precautions and measures established by the UAS operator for their protection; and (c) have explicitly agreed to participate in the operation; (10) before starting the operation, if airspace observers are used: (a) ensure the correct placement and number of airspace observers along the intended flight path; (b) verify: (i) that the visibility and the planned distance of the airspace observer are within acceptable limits as defined in the operations manual; (ii) the absence of potential terrain obstructions for each airspace observer; (iii) that there are no gaps between the zones covered by each of the airspace observers; (iv) that the communication with each airspace observer is established and effective; (v) that if means are used by the airspace observers to determine the position of the unmanned aircraft, those means are functioning and effective; (c) ensure that the airspace observers have been briefed on the intended path of the unmanned aircraft and the associated timing; (11) ensure that: (a) the UAS is accompanied by the corresponding EU declaration of conformity, including the reference to class C6; (b) the class C6 identification label is affixed to the unmanned aircraft. <