Part 2 - section overview

In plain language

This section defines product requirements for Class C1 unmanned aircraft systems, specifically limiting the range of follow-me mode to 50 meters, requiring a comprehensive user's manual, and mandating the inclusion of an EASA information notice.

Requirement as structured

This section defines product requirements for Class C1 unmanned aircraft systems, specifically limiting the range of follow-me mode to 50 meters, requiring a comprehensive user's manual, and mandating the inclusion of an EASA information notice.

Original regulatory text

(17) if equipped with a follow-me mode and when this function is on, be in a range not exceeding 50 m from the remote pilot, and make it possible for the remote pilot to regain control of the UA; (18) be placed on the market with a user's manual providing: (a) the characteristics of the UA including but not limited to the: — class of the UA; — UA mass (with a description of the reference configuration) and the maximum take-off mass (MTOM); — general characteristics of allowed payloads in terms of mass dimensions, interfaces of with the UA and other possible restrictions; — equipment and software to control the UA remotely; — reference of the transmission protocol used for the direct remote identification emission; — sound power level; — and a description of the behaviour of the UA in case of a loss of data link; (b) clear operational instructions; (c) procedure to upload the airspace limitations; (d) maintenance instructions; (e) troubleshooting procedures; (f) operational limitations (including but not limited to meteorological conditions and day/night operations); and (g) appropriate description of all the risks related to UAS operations; (19) include an information notice published by EASA providing applicable limitations and obligations under EU law.

Applies when

operation

UAS product requirements

class marking

C1

regulatory category

Open